Possess Sea Industrial Co., Ltd. - Materials Division
Professional Neoprene Fabric Manufacturer, Supplier and Exporter in China
  • Neoprene Fabric Manufacturer
  • Neoprene Fabric
Contact: Ms.Maggie, Mobile / WhatsApp: +86 138 168 15888, E-mail: maggie@neoprene.asia

Terry Neoprene Fabric, Plush Wetsuit Fabric - Manufacturer

"Terry Fabric" is a fabric with coil on surface, laminated "Neoprene Sponge" to become "Terry Neoprene Wetsuit Fabric", which has excellent hand feeling and warmth performance. Because the terry fabric has some hook and loop fastening properties and is cheaper than the OK fabric, sometimes used to replace the OK fabric. "Terry Neoprene Wetsuit Fabric" is usually used to make protective gear products.

We are a professional neoprene factory, using different kinds of neoprene sponges and fabrics from different countries or regions, according to the needs of customers, we can combine them into different grades and types of "Neoprene Fabric". It is supplied to its own finished product department and widely sold to manufacturing companies around the world. The price difference between different types of neoprene sponges and terry fabrics is very large (the price ratio of CR, SCR and SBR sponges is about 4 : 2 : 1), and we promise to provide a veritable product.

The width of the "Neoprene Fabric" is 51 inch / 1.3 meter / 1.41 yard, the volume is large, and the cargo value is not high. For international customers, we use express to send A4 size samples, large orders use sea. send products of full-size by express or air is very expensive, so DIY or small orders are not appropriate. It is suggested to seek local distributors to purchase the products, or to order end products directly from our product department.

  • Medical Plush Neoprene Fabric
  • Medical Plush Wetsuit Fabric

Medical Plush Neoprene Fabric (MP)

Explain: "Medical Plush" has a glossy surface and a loop structure, and some hook and loop fastening properties.

Applications: Sports protective gear and medical protective gear etc.

  • Long Shiny Terry Neoprene Fabric
  • Long Shiny Terry Wetsuit Fabric

Long Shiny Terry Neoprene Fabric (LT)

Explain: "Long Shiny Terry" has a glossy surface and a long loop structure, soft hand feeling, good warmth and extensibility, and some hook and loop fastening properties.

Applications: Sports protective gear, medical protective gear and wetsuit lining etc.

  • Short Shiny Terry Neoprene Fabric
  • Short Shiny Terry Wetsuit Fabric

Short Shiny Terry Neoprene Fabric (ST)

Explain: "Short Shiny Terry" has a glossy surface and a short loop structure. and some hook-and-loop fastening properties.

Applications: Sports protective gear and medical protective gear etc.

Neoprene Material Explain:

Normative Interpretation: "Neoprene" = "CR" ≠ "SCR" ≠ "SBR"
"Neoprene" just refers to the "CR" (Chloroprene Rubber), but now the industry "Neoprene" include "CR" (Chloroprene Rubber), "SCR" (Chloroprene & Styrene Butadiene Rubber), "SBR" (Styrene Butadiene Rubber).

Neoprene Sponge Color:

Neoprene Type CR SCR SBR
Sponge Color Black, Cream Black, Cream Black, Cream, Aqua, White

Neoprene sponge color is black, cream, aqua and white. Usually we use black, but if light color fabric is laminated, the use of cream, aqua or white neoprene sponge is better, this collocation can better reflect the color and bright of the light color fabric. If use the black neoprene sponge will light color fabric dark and distorted. But the cost of cream, aqua or white neoprene sponge is higher than the black neoprene sponge.

Neoprene Fabric Size & Thickness:

Size (inch) 51″x83″ 56″x83″ 60″x83″
51″x130″ 56″x130″ 60″x130″
51″x170″ 56″x170″ 60″x170″
51″x260″ 56″x260″ 60″x260″
Thickness 1mm - 10mm

Neoprene sponge is produced by foaming mold. The size of the mold defines the size of the neoprene sponge so the size of the neoprene sponge defines the size of the neoprene fabric.

Neoprene Fabric Quotation Explain:

Usually use "Sheet" or "Piece" as the unit of quotation, in which the cost of neoprene sponge is calculated by thickness, and the cost of fabric and processing is calculated by surface: "Neoprene Sponge Cost" (Thickness, Size and Type) + "Fabric Cost" (Size and Type) + "Processing Cost" (Laminated / Coated / Embossed / Perforated).

We do not recommend the use of "Meter" or "Yard" as the unit of quotation, because the actual length of the neoprene sponge block will be longer than the standard size. Using "Meter" or "Yard" as the unit of quotation is beneficial to the factory and unfair to the customer.

Many customers feel that using "Meter" or "Yard" as the quotation unit will get continuous products, and using "Sheet" or "Piece" as the quotation unit will get single piece product, that it is incorrect. The product is continuous or single piece, and has nothing to do with the unit of quotation, only related to the packaging method, "Carton Package" and "Roll Package" are continuous products, and "Crate Package" is a single piece product.

Continuous Product Explain: We use glue to connect the neoprene sponge and then laminated the fabric so that the neoprene fabric looks continuous. But because the neoprene sponge in the middle layer has a connected by glue, can not use continuously, can only use sheet-by-sheet.

Neoprene Fabric Production Processing:

Neoprene Fabric Production Processing

Limestone Based Eco-Friendly Rubber Sponge Can Fulfill The Below International Standards:

Oeko-Tex
Standard 100
Class II
REACH 151 substances in the Candidate List of Substances of Very High Concern (SVHC) for Regulation (EC) No 1907/2006 concerning the REACH
RoHS Restriction of Hazardous Substances - RoHS 2.0 Directive 2011/65/EU Annex II; Recasting 2002/95/EC
CPSIA USA Public Law 110-314 (Consumer Product Safety Improvement Act of 2008, CPSIA) -
1) Lead in accessible substrate materials
2) Phthalates
PAHs Comply with (Category 2) of ZEK 01.4-08 of German ZLS and its amendments
Toxic Elements Migration of Certain Elements - EN 71-3:1994+A1:2000+AC:2002